Dakota Digital VHX-57F Instrument Installation Download Page 1

Page: 1 / 4

Manual # 650513A

VHX-57F

Dakota Digital VHX Instrument Installation

For 1957 Ford Car

Your new VHX-57F kit includes:

Installation

Installation Manuals

Control Box

36” CAT5 Cable

Universal Sender Pack

VHX Display

1. Remove the stock gauge cluster from the dash and retain the factory hardware for reassembly.

Ford Adapter

Odometer Bezel

Main Bezel

(2X) 2” Screws

(6X) 1.25 Screws

Switch Assembly

Summary of Contents for VHX-57F

Page 1: ...w VHX 57F kit includes Installation Installation Manuals Control Box 36 CAT5 Cable Universal Sender Pack VHX Display 1 Remove the stock gauge cluster from the dash and retain the factory hardware for reassembly Ford Adapter Odometer Bezel Main Bezel 2X 2 Screws 6X 1 25 Screws Switch Assembly ...

Page 2: ...the hardware for reassembly 3 The inside of the gauge panel needs to have all the clips trim pieces and lens removed so it is a bare panel only These pieces are not reused and can be set aside 4 Carefully slide the odometer bezel into place from the front at an angle as shown in the picture ...

Page 3: ...ystem to the panel using the six 6 factory screws 6a With the VHX system in place carefully hold the front of the included main bezel while securing it on the backside using the supplied screws The two 2 screw locations are shown with white arrows 6b The six 1 25 screws are used for the remaining holes ...

Page 4: ...ve harm For more information go to www P65Warnings ca gov 8 Re install the gauge cluster to the dash using the factory hardware and refer to the main manual for wiring instructions to complete the VHX installation 7 Attach the provided CAT5 cable to the back of the VHX system and carefully route the open end to the control box mounting location before reassembly of the dash ...