Dakota Digital Retrotech RTX-68D-STD Instrument Installation Download Page 1

Page: 1 / 4

Manual # 650770

RTX-68D-STD

Dakota Digital RTX Instrument Installation

For 1968-70 Dodge/Plymouth B-Body Non-Rallye

Your new RTX-68D-STD kit includes:

Installation Manuals

Control Box

36” Main Harness

Universal Sender

Pack

RTX Display

Switch Assembly

0.5” Oval Head Screws

3x 0.5

” Pan Head Screws

Buzzer

Summary of Contents for Retrotech RTX-68D-STD

Page 1: ...rument Installation For 1968 70 Dodge Plymouth B Body Non Rallye Your new RTX 68D STD kit includes Installation Manuals Control Box 36 Main Harness Universal Sender Pack RTX Display Switch Assembly 4x 0 5 Oval Head Screws 3x 0 5 Pan Head Screws Buzzer ...

Page 2: ...auge cluster can now be taken out of the dash 1 Remove the lower dash pad and switch panel retaining the hardware recovered for reassembly 3 Remove the nine screws securing the plastic bezel to the gauge cluster Four are located on the bottom rear of the cluster five are located on the top Save these screws for the next step ...

Page 3: ...trol box and buzzer mounting locations as you mount the RTX system into the dash 4 Mount the factory gauge bezel to the RTX system by reusing the nine screws that held it to the factory gauge cluster 6 Mount the RTX system to the dash using the top two original factory screws Use the provided four replacement oval head screws for the lower mounting points BUZZER CABLE ...

Page 4: ... and birth defects or other reproductive harm For more information go to www P65Warnings ca gov 7 Re install the lower dash pad using the three provided pan head screws Then mount the switch panel to the dash using the factory hardware from disassembly 8 Refer to the main manual for wiring instructions to complete the RTX installation ...