Dakota Digital ECD-200BT, Manual, Page: 7 / 10

MAN# 650704B
7
Version menu display: - LED:

•
This will display the current software code of eth ECD-200BT
•
Tap the switch until

is displayed and h
old until “  ” is displayed
•
The display will show the first half of the software code, pressing and releasing the button wil
show the second half of the code
•
Example =

then

•
Pressing and holding the switch will exit to the main menu
o
Tappng the switch will generate a LED test pattern
o
Press and hold the switch to save until “  ” and exit to the main menu
Bluetooth menu display: - LED:

Two options are available for the Dakota Digital Accessory app: accessing the Bluetooth setup all the
time or only when the ECD-200BT has manually entered setup.
“  ” indicates the Bluetooth
connectivity will be active anytime the key is on, allowing speedometer adjustments to be made while
driving, while
“  ” allows changes when the ECD unit is in setup mode only.
•
Press and release the switch until
 is displayed and hold until “  ” is displayed
•
Bluetooth ID will display for the app. Example “  ” -
tap switch -
“  ”. Hold to continue
•
Tap the switch to select between the following options
o

= Bluetooth is available all the time. App changes can be made in real time driving.
o

= Bluetooth setup option are only available to the app when the ECD-200BT has
been placed in setup mode with the function switch.
•
Press and hold to save either option.
•
The app has a
“Safe Mode” that basically sets the Bluetooth to setup mode only.
•
To clear Safe Mode, enter the Bluetooth menu, select
 , then press and hold until “  “ to
save.