background image

 

- 6 - 

Manual #650541 

 

 

SAFETY PROCEDURES 

 

This unit is a microprocessor based Cruise Control. It is designed for ease of installation. Carefully follow the 
installation procedures in this manual for best results.  
 
DO NOT INSTALL THIS SYSTEM ON A DIESEL POWERED VEHICLE WHICH HAS A MANUAL TRANSMISSION 
WITHOUT A DISENGAGEMENT SWITCH (Kit# SEN-4206) ON THE CLUTCH PEDAL ASSEMBLY.  

 

WARNING  

Failure to follow the instruction manual could not only cause the system to work improperly, but could cause the 
vehicle to go into ‘limp-mode’, possibly causing damage to your vehicle and injury and/or death to you and your 
passengers.  
Only install on approved applications. The product described in this manual was developed, manufactured and tested 
in line with recognized technical standards and is in compliance with the fundamental safety requirements. 
Nevertheless, there are residual risks! It is therefore important to read this manual before installing and connecting the 
product. Keep the manual in a place that is readily accessible at all times.  
 

Modifications to the product  

The cruise control is designed, manufactured and tested with due regard to safety and reliability. Modifying or 
tampering with the product can affect its safety. This can lead to death, serious or slight injury to the driver or third 
parties, or damage to property or the environment. For this reason, the product must not be modified or tampered with!  
 

WARRANTY  

The manufacturer warrants to the original retail purchaser of the Dakota Digital Cruise Control that should this  
product or any part thereof, under normal use and conditions, be proven defective material or workmanship within 36 
months or 36,000 miles of the original purchase, such defect(s) will be repaired or replaced (at the m

anufacturer’s 

option) without charge for the parts.  
 
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty 
coverage (e.g. bill of sale), specification of defect(s), transportation prepaid to an approved warranty station. 
 
This warranty does not apply to any product or part thereof which in the opinion of the manufacturer has been 
damaged through alteration, improper installation, mishandling, misuse, neglect or accident. The warranty also does 
not cover the costs incurred for removal or reinstallation of the product, or damage to vehicle electrical systems.  
 
This WARRANTY is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING 
ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN 
WARRANTY. ANY ACTION FOR BREACH OF ANY WARRANTY HERE UNDER INCLUDING ANY IMPLIED 
WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 18 MONTHS FROM THE DATE 
OF ORIGINAL PURCHASE. IN NO CASE SHALL THE ORIGINAL MANUFACTURE BE LIABLE FOR ANY 
CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS 
OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other 
than expressed herein in connection with the sale of this product.  
 
THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR 
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE 
PURCHASE PRICE PAID BY THE PURCHASER OF THE PRODUCT.  
 
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or 
consequential damage so the above limitations or exclusions may not apply to you. This warranty gives you specific 
legal rights and you may also have other rights which vary from state to state. 

Summary of Contents for CRC-1000








Reviews: