MAN# 650017
3
The only wires that need to be passed to the doors are the two wires running to each door
motor. This should be done using a flexible rubber tube or rubber grommet to protect the wires, or by
using the optional
DAKOTA DIGITAL, INC. MAGNUM SHOOTERS. MAGNUM SHOOTERS
will
eliminate the wires running through the door jambs entirely for the cleanest appearance possible.
When these highly conductive brass contacts are mounted to the door and to the door jamb they
eliminate the wires completely. If you would like to use MAGNUM SHOOTERS they can be ordered
directly from DAKOTA DIGITAL, INC. by calling toll free 1-800-852-3228.
Using either the flexible
rubber tube, or MAGNUM SHOOTERS, route the remaining wires under the dash for the best
location and appearance.
Using a rod or cable, connect the actuator to the inside or outside release lever on the latch.
