MAN #650341D
Troubleshooting guide.
Problem
Possible cause
Solution
_
Sensor does not show on
PWR terminal does not have power.
Connect to a location that has power.
gauge readout.
GND terminal does not have a good
Connect to a different ground location.
BIM will not light up at all.
ground.
Module is damaged.
Return for service. (see instructions)
_
Sensor does not show on
OBD-II Interface cable is not connected. Connect the supplied OBD-II cable between the BIM unit and
gauge readout.
the vehicle diagnostic plug.
BIM display is scanning
The vehicle bus is not compatible.
Vehicles using the ISO 9141-2 protocol are not compatible with the BIM-01.
“J”, “F”, “C”
This includes some Chrysler and many import vehicles.
Sensor does not show on
Interface cable is not connected.
Connect the supplied 3.5mm data cable between the BIM unit and
gauge readout.
the gauge control box.
BIM has a steady dot lit
Interface cable is loose.
Make sure both ends of the cable are seated in securely.
On VHX systems, the BIM display
Follow instructions in VHX manual to enable the BIM display screen.
for this channel is disabled.
Another BIM is set with the same
Test module works when connected to control box alone. Change ID’s
channel IDs.
on one of the modules so each module uses unique IDs.
_
BIM display shows “
:
”
Data cable is damaged.
Inspect and replace 3.5mm data cable.
Another module on the bus is damaged Inspect other modules on the data bus.
or connected improperly.
SERVICE AND REPAIR
DAKOTA DIGITAL offers complete service and repair of its product line. In addition, technical
consultation is available to help you work through any questions or problems you may be having installing
one of our products. Please read through the Troubleshooting Guide. There, you will find the solution to
most problems.
Should you ever need to send the unit back for repairs, please call our technical support line, (605)
332-6513, to request a Return Merchandise Authorization number.
Package the product in a good
quality box along with plenty of packing material. Ship the product by UPS or insured Parcel Post. Be sure
to include the RMA number on the package, and include a complete description of the problem with RMA
number, your full name and address (street address preferred), and a telephone number where you can be
reached during the day. Any returns for warranty work must include a copy of the dated sales receipt from
your place of purchase. Send no money. We will bill you after repair.
Dakota Digital Limited Lifetime Warranty
DAKOTA DIGITAL warrants to the ORIGINAL PURCHASER of this product that should it, under
normal use and condition, be proven defective in material or workmanship for the lifetime of the original
vehicle it was installed in, such defect(s) will be repaired or replaced at Dak
ota Digital’s option.
This warranty does not cover nor extend to damage to the vehicle’s systems, and does not cover
removal or reinstallation of the product. This Warranty does not apply to any product or part thereof which
in the opinion of the Company has been damaged through alteration, improper installation, mishandling,
misuse, neglect, or accident.
This Warranty is in lieu of all other expressed warranties or liabilities. Any implied warranties,
including any implied warranty of merchantability, shall be limited to the duration of this written warranty. No
person or representative is authorized to assume, for Dakota Digital, any liability other than expressed
herein in connection with the sale of this product.
