Auto select:
Press one of the corner buttons to select the auto height mode you want. Press the mode
select button to go on to the bag dump or auto program screens.
Bag Dump:
Press the top right and bottom right switches at the same time to start the bag dump. Press the
mode select switch to go on to the auto program or auto/manual screens.
CANCEL
BEGIN DUMP
BEGIN DUMP
BAG PRESS BOTH >
DUMP TO DUMP >
CANCEL
MODE SELECT
CANCEL
Once the bag dump has begun, pressing any switch will cancel the bag dump. The bag dump
will stop automatically once the bag pressure is below the dump psi value. The dump psi value
defaults to 20 psi, but is adjustable from 5-35 (10-70 for 400 psi senders).
Once the bag dump has started, you can turn the key off and the unit will continue lowering the
bags until it reaches its set point. The next time the key is turned on the unit will bring all of the
bags up to the most recently selected auto setting.
To adjust the dump psi value, press and hold the right, center switch, then press and hold the
right center switch. Once the ‘ADJ PSI xxx’ display is shown, the current dump value will be
displayed. Press the right, center switch to change the value and press the left, center switch to
save the new dump psi value.
NO FUNCTION
CHANGE DUMP PSI
NO FUNCTION
CURRENT DUMP PSI VALUE
BAG ADJ PSI 20
DUMP TO DUMP
NO FUCNTION
STORE DUMP PSI
NO FUNCTION
7
