6.
4. The channel 1 relay and the 12 VDC output can be set to operate for
4 seconds or 10 minutes. To change the duration, locate the jumper (8)
on the upper right hand corner of the circuit board. When the jumper is
covering both pins, the output time is 4 seconds. When the jumper is only
covering one pin, the output time will be 10 minutes.
NOTE: Whenever a change is made to the time jumper or the dip switches,
the receiver must be turned “OFF” and then back “ON” to operate properly.
For maximum range between the transmitter and receiver, the receiver
should be mounted horizontally on a wall and as high off the fl oor as pos-
sible. Although the maximum range is about 3000 feet, things such as hills,
trees, metal siding and stucco can all reduce the range.
Frequency: 433.92 MHz
Operating voltage: 12VDC
12 volt DC output current: 400 mA maximum
Relay output rating: 24VDC at 3 Amp
TECHNICAL SUPPORT
If you encounter any diffi culty in the operation of this product after reading
the manual, please contact us. You can reach us by phone at 605-356-2772
from 8:30 AM to 5:00 PM Monday through Friday (Central Standard Time). We
will be happy to answer your questions and help you in any way we can.
WARRANTY
Dakota Alert warrants this product to be free of defects in material and work-
manship for a period of one year from the date of purchase. This warranty
does not cover damage resulting from accident, abuse, act of God or improp-
er operation.
If this product does become defective, simply return it to Dakota Alert. Please
include a note describing the troubles along with your name and return ad-
dress as well as the original sales receipt. If the product is covered under war-
ranty it will be repaired or replaced at no charge. If it is not covered by war-
ranty, you will be notifi ed of any charges before work is done.
7.
