6.
slide switch. If the switch is all the way to the top, it will be zone one, the other zones will
be located in order from the top.
Operation:
A. The factory-set default for the transmitter is Channel 01 Sub-channel (CTCSS) 01.
B. Channel selection. The MURS Alert transmitter is capable of transmitting on any of the
5 MURS channels. To select the proper channel, locate SW1 (fi gure 4-
6
) and set it to the
appropriate channel, If SW 1 is set to “0” it will default to channel 1.
C. Sub Channel (CTCSS) selection. To select the proper CTCSS locate SW2 and SW3 (fi gure
4-
7
). SW2 is labeled 0-3, SW3 is labeled 0-9. SW2 represents the fi rst digit in the CTCSS
and SW3 represents the second digit in the CTCSS. Example for CTCSS to be set at 38, SW2
must be set at 3 and SW3 must be set at 8. The are 38 different CTCSS combinations, if the
CTCSS is set at 39 or 00, no sub code will be in use.
TECHNICAL SUPPORT
If you encounter any diffi culty in the operation of this product after reading the manual,
please contact us. You can reach us by phone at 605-356-2772 from 8:30 AM to 5:00
PM Monday through Friday (Central Standard Time). We will be happy to answer your
questions and help you in any way we can.