Electrical Box
Si001423E
8
Removal Procedure
3. Electrical Box
Warning
Be sure to wait for 10 minutes or more after turning off all power supplies before
disassembling work.
Step
Procedure
Points
1
Remove the 2 screws
and release the earth /
ground wires.
2
Pull out the 2 clamps
and disconnect the
connector [S20].
[S20]: electronic expansion
valve coil
3
Pull out the clamp and
disconnect the
connector [S80].
[S80]: four way valve coil
[S90]: thermistors
When reassembling, insert
each clamp into the small
holes.
4
Pull out the clamp and
disconnect the
connector [S90].
5
Release the thermistor
harness from the hook
on the bottom of the
electrical box.
6
Pull out the clamp and
release the harness of
the thermistors.
(R21764)
Earth / ground wire
[S20]
Clamp
(R21765)
Clamp
[S90]
[S80]
(R21766)
(R21816)
For the electronic
expansion valve
coil harness
For the four
way valve
coil harness
For the thermistor
harness
Clamp
Hook
(R21817)
(R21767)
Hook
Clamp
Thermistor harness
