15
E
F
D
C
B
A
E
F
A
B
C
D
G
Valve Kit
The valve kit is applied for 2-pipe system.
The kit consists of (refer structure figure 0):
• 2/3 way valve body
is made of brass, maximum working pressure 1.6MPa.
• Electric actuator
has the following specifications:
-Power supply: 220V±10%/50/60Hz (±2Hz)
-Activation: ON/OFF
• Hydraulic kit
for the installation of the valve on the heat exchanger, complete with 2 ball valves for
adjusting the water flow and for closing the water circuit when perform maintenance to the unit.
• Y-strainer
protects unit from impurity, increases the service life and insolating valves.
All parts of 2-way valve kit are indicated in the figure 1. ( For right pipe connection unit.)
All parts of 3-way valve kit are indicated in the figure 2. ( For right pipe connection unit.)
Figure 1
Figure 2
A Ball valve
B Brass connector
C Y-strainer
D Water inlet pipe
E Water outlet pipe
F 2-way valve
A Ball valve
B Brass connector
C Y-strainer
D Connector pipe
E Water inlet pipe
F 3-way valve
G Water outlet pipe
Figure 0
