Dake Corporation
1809 Industrial Park Dr
Grand Haven, MI 49417
www.dakecorp.com
983111-2
14
REV062021
QUICK HEAD ADJUSTMENT FOR ANGLE CUTS
1. Loosen head swivel lock handle.
2. Rotate head to the required angle by aligning the indicator to the scale. Three presets
can be used or any angle in between.
3. Lock head back down.
For mitering beyond 45° flip up the stop located on the left side attached to the base to allow
for greater angle (60°). This can also be used to tweak the angles if needed.
CUTTING SPEED ADJUSTMENT
CAUTION - Always allow blade to achieve speed before starting your cut and never
change speeds while cutting.
Speed selector switch located on thee control box
and has two blade speeds 1 & 2.
1 = 114 FPM
2 = 230 FPM
It also has a 0 setting which stops the blade from
rotating.
Select 1 or 2 and activate the trigger switch on
the handle to begin your cutting operation.
