Dake S-DDH6, Installation, Use And Maintenance Instruction

Page: 20 / 27

FINAL OPERATIONS
Install the grease filters in the specific seat, letting
them through the central opening of the hob, see
Fig. 7.
To close the central opening of the hob, place the
metal grill on top of it, as shown in Fig. 8.
ELECTRICAL CONNECTIONS
The connection of the product to the power sup-
ply must be carried out in compliance with the in-
ternational and local regulations in force.
The interconnection of any separate part of this
appliance must be carried out by a qualified tech-
nician in compliance with the wiring regulations.
The connection to the power supply must be by
means of a plug and it can also be done by the
end user.
Any liability in case of accidents caused by failure
to arrange the earth connection or failure to ar-
range it correctly is hereby declined.
The controls located under the glass of the hob
have a cable, which must be connected to the
control box (Fig. 9).
EN
PRODUCT
INSTALLATION
Before any installation operation is carried out,
make sure that the appliance is disconnected from
power supply.
TECHNICAL OPERATIONS
Place the overturned hob on an adequate surface,
preserving the glass from any scratches. Take the
filtering case out of the packaging and install it as
shown in Fig. 1. The metal hooks of the filtering
case are to be inserted in the specific slots, loca-
ted on the rear of the hob, as shown in fig. 2. After
having hooked the filtering case to the hob, fix it by
means of the provided metric screw, to be used as
shown in Fig. 3.
Carry on the installation by securing the hob to the
cabinet, as shown in the specific user manual pro-
vided within the packaging of the hob.
IN CASE OF RECIRCULATING OPERATION
(Fig. 4)
The air outlet of the product must be connected to
the opening in the cabinet so as to recirculate the
exhausted air in the kitchen. Charcoal filters, to be
purchased separately, are needed in this configu-
ration. They must be installed as shown in Fig. 6.
Charcoal filters are located right under the grease
filters, so they must be installed befo re the grease
filters. A ducting kit with grill (on the end to be in-
stalled in the cabinet) is also available for separate
purchase.
IN CASE OF DUCTING OPERATION (fig. 5)
The air outlet of the product must be connected to
the outside of the house. The ducting to be instal-
led from the air outlet of the product to the outside
of the house is not provided with the appliance.
The product is equipped with plastic flanges, to
connect ducts of sections 220x90 mm.
20 S-DDH6