7
USING THE NO-MAR TIP
When attaching or detaching the No-Mar Tip, be sure to
remove your finger from the trigger and disconnect the air
house from the nailer.
If you like to protect the surface of workpiece against
scratches or markings made by the safety, attach the
accessory No-Mar Tip to the safety.
1). Disconnect air hose from tool.
2). Put the No-Mar Tip to the toe of the safety.
To replace the No-Mar Tip:
To remove the No-Mar Tip: Pull the no mar tip directly
away from tool.
WARNING
FIG. 11
The nose cap may reduce nailing depth due to its thickness.
Re-adjustment of nailing depth is required.
JAM CLEARING
MAINTENANCE
Remove a jammed nail in the following order:
FIG. 12
No-Mar Tip
Safety
When cleaning a tool be careful not to disassemble any
portion of the tool since internal components may be
misplaced or safety components may be improperly
mounted.
Certain cleaning agents such as gasoline, carbon
tetrachloride, ammonia. etc. may damage plastic parts and
o-rings.
CLEANING
WARNING
ADJUSTING THE EXHAUST
The direction of the exhaust vent can be changed by
turning the top cover (FIG 9).
FIG. 9
NAIL INDICATOR
The red indicator bars are used to show when the tool
needs to be reloaded (FIG 10). When the tool is loaded with
a nail strip, the red indicator bars will no longer be visible in
the indicator window. As then nails strip is consumed, the
red indicator bars will start to become visible. The tool
should be reloaded when the red indicator bar is half way
exposed in the indicator window.
Nail Indicator
FIG. 10
1.
2.
3.
4.
5.
6.
7.
Disconnect air hose.
Remove fasteners from the tool. Failure to do so will
cause the fasteners to eject from the front of the tool.
Completely remove the small nose screws (A) and the
top nose plate (B) to reveal the jammed fastener.
Be caution not do bend or damage the driver blade,
using pliers or a screwdriver if required to clear the
jammed fastener.
Put the nose plate (B) Back on the nose (C), fastening it
with the screws (A).
Reconnect the tool to the air resource.
Reload the tool with fastener.
Nose screws (A)
Nose (C)
Nose plate (B)