6
Disconnect air supply.
Depress the pusher tab to disengage pusher from the
nails (FIG 11).
Slowly slide pusher forward past the nails to the
nosepiece (FIG 12).
Remove nails by releasing the pusher spring and sliding
nails backwards.
Depress the magazine tab then slid nails past nail
stopper tab and out of the magazine (FIG 13,14).
FIG. 11
1.
2.
3.
4.
FIG. 10
REMOVING NAILS:
Always disconnect tool from air supply before removing
nails from magazine.
This avoids the risk of unintentional
operation.
Do not disconnect air hose from the tool with finger on the
trigger or safety depressed.
The tool can fire when
reconnected to air supply.
WARNING
WARNING
FIG. 12
CORRECT
load nails
XR250/250S LOAD NAILS
INCORRECT
Load Nails
Do not insert different length sized nail strips at same time.
If do so, it could result in damaging nail strips and
jamming.
FIG. 6
FIG. 7
INCORRECT
FIG. 8
FIG. 9
FIG. 13
Pusher tab
Nail stopper
