Daiyo DDB 33W Instruction Manual Download Page 2

Page: 2 / 3

Transmitter Installation :

●

Stick the Transmitter on the wall or the door with double-sided adhesive tape (see image 2).

Battery Installation (Receiver):

●

Remove the battery cover, insert batteries into the battery slot with the correct battery polarity.

Receiver Installation:

●

Battery Cover

2x1.5V AA
Alkaline Battery

(Not Included)

Drill two holes on the wall where desired. The holes are about 6mm in diameter. The

distance between the two holes is about 36mm. Insert two wall plugs (included) into both

holes. Secure the Transmitter cover with two screws. Insert two screws (included) into the

wall plugs. Now close the Transmitter (see image 1).

Drill one hole on the wall where desired. The

hole is about 6mm in diameter. Insert one

wall plug (included) into the hole. Insert one

screw (included) into the wall plug. Do NOT

completely insert the screw into the wall plug;

allow part of the screw to jag out to hold the

receiver. Finally, hang the Receiver.

Avoid placing the Receiver on UPVC frames,

above heat souces or in damp areas.

Summary of Contents for DDB 33W

Page 1: ...85dB within 0 5m Receiver Bandwidth 90 KHz Transmitting Power 10mW Operating Range 150m in the open air Channel Space 1 million sets of auto learning codes Receiver Power Consumption 200uA Transmitte...

Page 2: ...r The distance between the two holes is about 36mm Insert two wall plugs included into both holes Secure the Transmitter cover with two screws Insert two screws included into the wall plugs Now close...

Page 3: ...ease Select 1 out of the 36 melodies 3 Press the Transmitter once to pair up with the Receiver Notes If the Receiver sounds when no one pressed the Transmitter the Receiver is likely to be interfered...