SETUP
3: Installing all other units
Connect the controller to its
corresponding port on the power
supply box.
Insert the power plug into a wall
outlet, turn on the switch, and
press the power on the remote
control.
Lift the legrest by reclining the chair. Turn off the power switch and remove the
power cord. Attach the corresponding connectors to the ports located on the back of
the legrest.
After all parts assembled, please insert the power cord into the power socket, and
then turn on the switch. Press the power on the remote control to start massage.
Controller
Controller plug
Power Cord
Power cord connector
Power On / Off
Air valve
Electrical port
Electrical plug
Airtube
Use the controller to lower the backrest to its furthest outstretched position. Raise
the legrest to its highest position. Make sure that sufficient open space surrounds the
chair on all sides. Make sure that the leg rest is properly connected to the main part
of the chair.
Return the chair to its original, upright position.
Make sure there are no objects, people, or pets in the vicinity of the unit.
Do not sit on the massage chair while the legrest is rising.
To avoid possible damage, do not suddenly load the legrest with heavy weight.
Do not allow children to play with this massage chair. If controls are tampered with,
accident or injury arising from the power supply box may result.
After your massage finishes its cycle, switch off power and remove the power plug
from its wall outlet.
Avoid operating this chair during rain and thunderstorms.
When the chair is not in use, switch off power and remove the power plug from its
wall outlet.
If you do not plan to use the chair for an extended period of time, please put it into
storage.
Avoid dragging this chair across surfaces that can easily be damaged, such as
wooden or carpeted flooring.
To prevent electric shock, do not operate this chair within damp environments.
Do not place this chair near a stove or other significant sources of heat. Do not
expose the chair to prolonged sunlight. Damage to its leather cover may result.
Do not hold on the legrest leg/sole massage section when moving the unit. If this is
not observed, the section may slide as you move the unit, and injuries may occur.
Do not drag or push the unit in an installed state. Protect your floor (place a mat or
similar) when moving the unit on its wheels to avoid damage to your floor.
CAUTION
BEFORE SITTING DOWN
SETUP
