background image

Product name: Majesty
Model number: MAJ-1010
Rated voltage:110-120V~
Rated frequency: 60 Hz
Rated  current: 1.1 A

TECHNICAL SPECIFICATIONS

No.

Problem

Check the following:

Explanations / Remedies

Noises are heard 
during operation

Operation fails to 
start

Airbags within the 

seat and the legrests 

fail to work properly

Airbags within the 

seat and the legrests 

fail to work properly

The massage chair has 
detected some error that 
it is unable to display. 

Clean out the air tubes.

Are the air tubes 
blocked?

Turn off power, then turn it on 

again.  If the problem 

persists, disconnect the 

power plug from the wall 

outlet and contact an 

authorized repairman

Has the power plug 
slipped out of the wall 
outlet?
Is the power switch in the 
“off” position? Has the 
fuse blown out?

These noises are normal and 
arise from friction between 
the massage rollers and the 
leather cover. 
Connect the power plug 
securely to the wall outlet.
Switch power to the “on” 
position. Replace the fuse 
with another of the same 
type.

N/A

Do not dismantle or attempt to repair the chair yourself.  Doing so will void the 
warranty and U.S.Jaclean/Daiwa will not bear any responsibility for any subsequent 
consequences. 

IMPORTANT

If you encounter problems operating the Majesty, please check the points above to see if 
they can be rectified. If the Majesty still malfunctions or does not work, please turn off the 
chair and remove the power plug from the electrical outlet.  Contact U.S. Jaclean Repair 
Service at 310-538-2298 for assistance. 

TROUBLE SHOOTING

Summary of Contents for MAJ-1010













Reviews: