Daitsu FDLA-09, Installation, Operation & Service Manual

Page: 135 / 322

Page 23 of 77
SK2019 FCSD(H)-V/P-ECM-001
Standard Configurations and Accessories
First check the contents of the package.
There are three types of plug-and-play control box:
•
Plug-and-play control box – EC-S1 Type
FCSD(H)-(V/P)S configuration – Complete function integrated controller, compatible with IR handset controller, wired
wall-pad, serial networking for master-slave and MODBUS applications.
•
Plug-and-play control box – EC-W1 Type
FCSD(H)-(V/P)W configuration – Flexible function controller, compatible with standard wired thermostat controller, with
zone control functionality, and with optional electrical heater compatibility.
Optional and standard accessories supplied with the unit are dependent on control configuration type.
Control Configuration Type
Accessory list:
~S1:
Complete function on board PCB
with integrated group control
functionality.
~W1:
Flexible function on board
PCB with drain pump, louver
and zone control
functionality.
Plug-and-play control box with
complete function controller.
Standard: Factory installed/
Optional: Field installed
N/A
IR remote handset
SGS14HFCA-16000101
Optional (1 pc) N/A
Wired wall-pad
SGS14HFCA-26000101
Optional (1 pc) N/A
Plug-and-play control box with
flexible functionality
N/A
Standard: Factory installed/
Optional: Field installed
STCD wired thermostats
ALL models
N/A Optional (1 pc)
Installation Manual Standard (1 pc) Standard (1 pc)
External Drain Pan Standard (1 pc) Standard (1 pc)