1
3
Clean and maintenance
Clean filter
1
Open panel
Pull out the panel to a certain
angle as shown in the fig.
3
Clean filter
●
Use dust catcher or water to
clean the filter.
●
When the filter is very dirty,
use the water (below 45ºC )
to clean it, and then put it in a
shady and cool place to dry.
2
Remove filter
Remove the filter as
indicated in the fig.
4
Install filter
Install the filter and then close the
panel cover tightly.
WARNING
■
The filter should be cleaned every three months. If there is much dust in the
operation environment, clean frequency can be increased.
■
After removing the filter, do not touch fins to avoid injury.
■
Do not use fire or hair dryer to dry the filter to avoid deformation or fire
hazard.
