49
ENGLISH
The exhaust hose and adaptor must be installed or removed
in accordance with the usage mode.
COOL,HEAT (heat pump type) or AUTO
mode
Install
FAN, DEHUMIDIIFY or HEAT (electrical
heat type) mode
Remove
1. Install the window Exhaust adaptor B onto the exhaust
hose as shown in Fig.16. or Fig.17. Refer to the previous
pages for window kit installation.
2. Push the Exhaust hose into the air outlet opening along
the arrow direction (See Fig.18).
The exhaust hose can be installed into the wall
(Not applicable to the units without adaptor A, expansion
plugs and wooden screws of Accessories )
1. Prepare a hole in the wall. Install the wall Exhaust
adaptor A onto the wall (outside) by using 4 expansion
plugs and wooden screws, be sure to fix thoroughly. (See
Fig.19)
2. Attach the Exhaust hose to wall Exhaust adaptor A.
Note:
Cover the hole using the adaptor cap when not in use.
The duct can be compressed or extended moderately
•
according to the installation requirement, but it is
desirable to keep the duct length to a minimum.
IMPORTANT
:
DO NOT OVER BEND THE DUCT (SEE Fig.20).
.
Exhaust hose installation
Expansion
plug position
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Adaptor A
Adaptor cap
max 120 CM
min 30 CM
