ENGLISH
35
Start Operation
1
Ensure that the unit is connected to the power socket.
2
Make sure the water tank is correctly positioned. (If the bucket full lamp illumi-
nates when the unit is first switched on, remove the tank and replace it).
3
Turn the humidity control knob to the desired setting (NORMAL) or CONTI-
NUOUS to work.
4
The unit will shut down when turned to OFF position.
* * While turning on (or off) the machine, the defrost lamp would be bright once.
Full Bucket Lamp
The lamp will illuminate when the water container is full.
To empty the unit, first unplug from power source then automacarefully remove
the tank and empty the collected water.
Replace the bucket carefully before switching the unit on again.
Defrost Lamp
If the ambient temperature is too low the unit will automatically start to defrost
and the light will illuminate. The defrost lamp will also illuminate if the air filter
becomes clogged.
* * This unit has 3-min lag due to the device for protecting circuit .In order to pro-
long the compressor's working life, the compressor will not start until the unit
has run for 3 minutes.
* * Do not use the extension cord or the same socket with other electric appliance.
OPERATING INSTRUCTIONS
Remove the water in the water tank
with two hands
FULL
RUNNING
DEFROST
DeshumiEng 4/6/09 12:40 Página 35
