Daisy XL-3610, Manual

Page: 72 / 74

71
Configuration of instructions and examples
Example for user-defined prefix and suffix:
You can edit 10 characters as prefix or suffix. (In order to make sure the prefix and suffix can
output normally, please enable user-defined prefix or suffix first)
Example 1.1:
Set” XYZ” as prefix on all codes
Before set up , please search HEX value for all codes is ”99” (Appendix: barcode type ID Table);
find “X””Y””Z” HEX value is “58””59””5A” (Appendix:Visible Character ASCII Table)
Step: Set “User - defined Prefix”; Set “ 9””9””5””8””5””9””5””A” (Append ix: data and edit barcode);
Set”Save”.
If you want to revise the scanned barcode before save, please set up “Cancel the data from
previous read” or”Cancel a string of data from previous read” to reset. If you want to give up
setting scan , then scan” Cancel current setting”.
Example 1.2:
Set ”R” as prefix on QR
Before set up, please search HEX value for QR code is “51”(Appendix: barcode type ID Table);
find”R” HEX value is “52” (Appendix:Visible Character ASCII Table)
Step: Set “ Custom prefix”; Set”5””1””5””2” (Appendix: data and edit barcode); Set” Save”.
Example 1.3:
Cancel Custom prefix in QR code
Step: Set” Custom prefix”; Set”5””1”; Set” Save”
Note: If set up prefix on all QR codes, it will default all QR codes prefix after set up.
In contrast, if cancel all prefix / suffix on barcodes, please set “ Clear All Custom Prefix” and
“Clear All Custom Suffix”.
Example for barcode length range configuration
Please sure it not bigger than current maximum length range when set up minimum length.
Otherwise, it will show error. In the same way, must be make sure it’s not smaller than current
minimum length range when set up maximum length.