Model 9016 X-Purge Operator Interface
Daisy Data Displays, Inc.
February 2022
12
D010-000002
6
Operation Notes
6.1
Division 1 X-Purge
X-Purge systems are fully automatic. The system disconnects power and signal in the
enclosure in the event of a purge failure. The DAISY purge control also performs automatic
self-diagnostics and can report other errors.
Table 6.1 X-Purge Status Light Key
the normal conditions and the errors (fatal and non-fatal) that are reported by the purge
status LED (see drawing P008, Note 9).
NOTE:
Blink Codes can be read in Forward or Reverse. For example,
Code [2 – 3]
is the same
as
Code [3 – 2]
. A
[ “0” ]
in the code column indicates a steady (non-blinking) light.
The
Status Column
indicates the nature of the information being given:
•
“Informative”
is simply a status indication with no action needed.
•
“Non-fatal”
is a condition that can be corrected, and operation will then proceed
normally.
•
“Fatal”
Errors require the purge system be SHUT DOWN before correcting the
problem and restarting the purge cycle.
Table 6.1 X-Purge Status Light Key
Color
Code
Meaning
Status
Recommended Action
Green
0
Operate, purge
complete
Informative
N/A
Yellow
Purge in progress
Informative
N/A
Yellow
1-1
Minor overflow
Non-fatal
Reduce PSI via air-regulator
Red
0
Waiting to begin
purge
Non-fatal
Verify Purge air supply is on. If still not indicating
needed pressure, verify all doors and access panels are
closed and tightly sealed. Increase air pressure with air-
regulator as needed after all doors and seals have been
verified.
Red
1-1
System Error
Fatal
Contact DAISY Customer Service (See Section 7)
Review Customer Service on page 14 and
Troubleshooting Section page 15.
Red
2-1
Under pressure
Fatal
Loss of pressure. Verify proper door seal and Purge Gas
supply.
Red
2-2
Over pressure
Fatal
Reduce air pressure 5 PSI min. via air regulator.
Continue to reduce pressure until purge completes
without error. If problem continues, contact DAISY
customer service (See Section 7).
Red
3-2
Major overflow
Fatal
Reduce air pressure 5 PSI min. via air regulator.
Summary of Contents for 9016 X-Purge
