“Restore default settings?”
“* press MODE for Yes”
“* press FEED for No”
Press MODE to restore the defaults settings or
FEED to cancel the operation.
3.3
Wireless Bluetooth communication
If your printer has a Bluetooth module installed You will be able to
establish connections to the host computer without communication
cable. To enable the Bluetooth module You have to press and hold
down MODE and CLEAR buttons simultaneously while the printer is
powered (the Power LED is on). The following message will be
printed:
“Bluetooth ON”
Press and hold down MODE and CLEAR buttons simultaneously
once again to disable the Bluetooth module. The following message
will be printed:
“Bluetooth OFF”
NOTE: The Bluetooth module is enabled and disabled by pressing
buttons while the printer is on. For Self-test and Reset settings
modes You have to turn the printer off before pressing and holding
down any button.
NOTE: The Bluetooth module supports the following baud rates:
9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps.
The baud rate is set by the application running on the PC.
