background image

Daintree® Wireless Controls

Wireless Scene Switch(WWD2-4SM)

Installation Guide

6

Technical Data

Product Specifications

 

 

 

 

SKU

DESCRIPTION

ARTICLE

 

NO

.

WWD2-4SM

FCC ID: 2AS3F-WWD2SM

IC: 25008-WWD2SM

Operating Control

E486320

93141336

Product Certifications

Product Availablity

Wireless Wall Switch, Surface Mount, 4 Button, Battery

The alkaline batteries supplied with your wireless switch are prone to leak over their lifetime, particularly when the battery 

is mostly depleted. In the event that your battery leaks alkaline into the battery compartment, the chemicals can damage 

the metal terminals.The chances of this happening can be reduced by changing the batteries in the switch promptly when 

the batteries are nearing their end of their useful life. If a battery leak should occur, however, it should be cleaned up to 

prevent damage to the wireless switch.

WARNING: THE CHEMICALS LEAKED FROM ALKALINE BATTERIES ARE CORROSIVE. WHEN HANDLING LEAKING BATTERIES, 

PROPER PERSONAL SAFETY EQUIPMENT SHOULD BE USED, INCLUDING RUBBER GLOVES AND EYE PROTECTION.

If it is discovered that the batteries have leaked, wearing rubber gloves and using eye protection, remove all of the batteries 

from the battery compartment and seal them in a plastic bag. The bag should be discarded in a manner in accordance with 

local laws and regulations. Then, using a small cloth lightly moistened with vinegar or other mild acid, carefully wipe all of 

the leaked battery chemicals from inside the battery compartment and allow it to dry. Once dry, the batteries may be 

replaced and the switch may be reinstalled.

114mm H x 70mm W x 15mm D
130g
(4) AAA1.5V battery
5yr(normal operation)
-10°C to 40°C (Indoor Use Only)
Network joined/Button triggered
Surface mount with either screw hole in backplate or with included 3M tape
5 years
Operating Control
Independently Mounted

Dimensions
Weight
Power Supply
Battery Life
Operating Environment
Status Indicator
Mounting
Warranty
Purpose of Control
Construction of Control
Type 1 Action
Pollution Degree 2

Summary of Contents for WWD2-4SM








Reviews: