Installation Guide
IND739
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING/AVERTISSEMENT
RISK OF ELECTRIC SHOCK
• Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF ELECTRIC SHOCK
• Follow all NEC and local codes.
• Use only UL approved wire for input/output connections.
Minimum size 18 AWG (0.75mm²).
RISQUES DE DÉCHARGES ÉLECTRIQUES
• Coupez l’alimentation avant d’inspecter, installer ou déplacer le
luminaire.
• Assurez-vous de correctement mettre á la terre le boítier
d’alimentation électrique.
RISQUES D’ INCENDIE
• Respectez tous les codes NEC et codes locaux.
• N’utilisez que des fils approuvés par UL pour les entrées/sorties
de connexion. Taille minimum 18 AWG (0.75mm²).
Frame
WARNING/AVERTISSEMENT
Save These Instructions
These instructions do not purport to cover all details or variations in components nor
to provide for every possible contingency to be met in connection with installation,
operation or maintenance. Should further information be desired or should particular
problem arise which are not covered sufficiently for the purchaser’s purpose, the
matter should be referred to GE Current, a Daintree company.
Current does not claim liability for any installation not performed according to this
guide or not by a qualified electrician.
Included Parts & Hardware
For Your Safety
• Installation to be performed by factory trained or qualified personnel.
Ensure this manual is provided to the installers and users.
• Use this product only in the manner intended by the manufacturer.
If there are any questions or concerns, contact the manufacturer.
Prepare Electrical Wiring
Electrical Requirements
The LED luminaire must be connected to the mains supply according
to its ratings on the product label.
Grounding Instructions
The grounding and bonding of the overall system shall be done in
accordance to local electric code of the country where the luminaire
is installed.
Housing(s) -
Suspended, Surface, Stem,
Standoff
Cable Assembly -
Suspended
Stem Assembly -
Stem
Driver Box -
Suspended, Surface, Stem,
Standoff
Standoff
Geartray(s) -
Suspended, Surface, Stem,
Standoff
Lens(es) -
Suspended, Surface, Stem,
Standoff
