DTP10-D hardware user
’s manual
DAINCUBE Corp.
27 / 35
9.2. VGA
connect
After turning off the main power supply, connect the system cable of DTP10-D.
Connect RGB cable to junction box and PC.
Teach
Pendant
RED
GREEN
BLUE
Hsync
Vsync
Cable Shield
Video_GND
5,6,7,8,10
1
2
3
13
14
Housing
PC Side
Connector
Side
4,9,11,12,15 pin
Not Connection
5
1
10
15
6
11
Max 1.2m Cable
5m Cable
26pin Circular receptacle
(DTP-CU-26R)
[Figure 9-2] VGA
connection Example
For VGA connection, please use standard video cable to connect.
Using HDMI to VGA, you must use a cable that supports EDID.
When connecting, connect each shielded wire of the analog video to the video ground and connect it to
the VGA connector 5, 6, 7, 8, 10 pin as shown.
The teach pendant shield must be connected to the VGA connector (housing) body.
Please wire length of cable up to 16.2 m.
9.3.
USB Cable (Touch, Key)
connection
USB_DM
USB_DP
1
2
3
PC Side
Connector
Side
VBUS
Max 1.2m Cable
Teach
Pendant
5m Cable
NC
4
GND
5
[Figure 9-3]
Example of USB cable connection
Wire the cable length up to 1.2m.
