Daimler Freightliner Cascadia 2021 Page 132 Driver Manual Download | Manualshive

Page: 132 / 322

background image

SGA Indicator Lamps

NOTE: Depending on the type of instrument
panel installed in the vehicle, the indicators de-
scribed as grey may be white.

Name

Indicator

Color

Side Guard Assist
Initializing

Grey

Side Guard Assist Active

Grey

Side Guard Assist Error or
Deactivation

Grey

Name

Indicator

Color

Side Guard Assist Trailer
Monitoring Active

Grey

Side Guard Assist Trailer
Monitoring Deactivated

Grey

Caution, Side Guard Assist

Amber

Caution, Side Guard Assist
Trailer

Amber

Caution, Side Guard Assist
Trailer Monitoring
Deactivated

Amber

Warning, Side Guard Assist

Red

Warning, Side Guard Assist
Trailer

Red

Warning, Side Guard Assist
Trailer Monitoring
Deactivated

Red

Table 6.3, Side Guard Assist (SGA) Lamps

Activation Conditions of Side Guard
Assist

SGA is active when the ignition is turned on.

If a trailer is attached to the vehicle, a grey or white
indicator lamp (a triangle and trailer) activates in the
instrument panel display screen. See the fourth icon
in

If a trailer is not attached to the vehicle, a grey or
white indicator lamp (triangle) activates in the instru-
ment panel display screen. See the second icon in

f547172

04/16/2020

1

Note: RH shown, LH similar.

Fig. 6.10, Radar Sensors with Covers

f611532

10/11/2018

Fig. 6.11, Sensor Monitoring Area

Detroit Assurance 5.0

6.11

«
...
130
131
132
133
134
...
»

Summary of Contents for Freightliner Cascadia 2021



































































































































































































































































































































Reviews:

No comments

Related manuals for Freightliner Cascadia 2021

Brand: RAM Commercial Pages: 172

Brand: Shop Tuff Pages: 9

Brand: Scheppach Pages: 112

Brand: Jacobsen Pages: 24

Brand: stertil Pages: 74

Magliner H-3376

Brand: U-Line Pages: 6

Brand: unicraft Pages: 32

Brand: Hard Head Pages: 24

Brand: Winget Pages: 170

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands