Daimler Freightliner Business class M2 100, Maintenance Manual

Page: 22 / 149

Table 11 , MOP 00-12, lists the lubrication and fluid
level check maintenance operations that must be
performed at the M1 Maintenance Interval.
MOP 00-12, M1 Lubrication and Fluid Level Check
Maintenance
Operation No.
Title of Maintenance Operation
25-01 Eaton Fuller Clutch Release Bearing Lubricating
25-02 Eaton Fuller Clutch Release Cross-Shaft Lubricating
25-03 Clutch Hydraulic Fluid Level Checking
26-01 Transmission Fluid Level Checking
31-03 Fifth Wheel Lubricating
31-04 Trailer Electrical Connector Lubricating
32-02 Suspension Lubricating
33-01 Kingpin Lubricating
*
33-02 Tie Rod End Lubricating *
35-01 Axle Lubricant Level Checking
41-02 Driveline Lubricating
42-05 Dana Spicer, Haldex, and Gunite Slack Adjuster Lubrication
42-07 Meritor Slack Adjuster Lubrication
42-16 Versajust Slack Adjuster Inspection and Lubrication
†
46-03 Power Steering Fluid Level Inspecting
46-04 Power Steering Gear Lubricating
46-05 Drag Link Lubricating
72-01 Door Seals Lubricating
88-01 Hood Rear Support Lubrication
* For Detroit axles, complete this procedure once a year or at the following applicable interval, whichever comes
first: every 5000 miles (8000 km) for Schedule I vehicles; every 25,000 miles (40 000 km) for Schedule II vehicles;
or every 100,000 miles (161 000 km) for Schedule III vehicles.
†
Complete this procedure every 25,000 miles (40 225 km), 3 months, or 500 operating hours, whichever comes
first.
Table 11, MOP 00-12, M1 Lubrication and Fluid Level Check
General Information
00
M1 Lubrication and Fluid Level Check: 00–12
Business Class M2 Maintenance Manual, November 2016
00/15
Property of American Airlines