Daikin VRVIII Series, Technical Data Manual

Page: 3 / 11

• BS Units • BS UNITS • BSVQ100-250P8B
• VRV
®
Systems • BS Units
2
1 Specifications
3
B S U n i t s VR V S ys te ms BS VQ 10 0- 25 0P 8 B S U n i t s
1-1 TECHNICAL SPECIFICATIONS
BSVQ100PV18 BSVQ160PV18 BSVQ250PV18
Power input
(nominal) Cooling kW 0.005 0.005 0.005
Heating kW 0.005 0.005 0.005
Casing Material Galvanised steel
Dimensions Unit Height mm 207 207 207
Width mm 388 388 388
Depth mm 326 326 326
Weight Unit kg 14.0 14.0 15.0
Outdoor Unit Liquid (OD) Type Brazing connection
Diameter mm 9.5 9.5 9.5
Gas Type Brazing connection
Diameter mm 15.9 15.9 22.2
Discharge Gas Type Brazing connection
Diameter mm 12.7 12.7 19.1
Indoor Units Liquid (OD) Type Brazing connection
Diameter mm 9.5 9.5 9.5
Gas Type Brazing connection
Diameter mm 15.9 15.9 22.2
Sound absorbing thermal insulation material Foamed polyurethane, Frame resisting needle felt
Standard
Accessories Item Installation manual
Attached piping
Insulation pipe cover
Clamps
Notes In case of connection with a
20~50 type indoor unit, match
to the size of the field pipe
using the attached pipe.
Connection between the
attached pipe and the field pipe
must be brazed.
In case of connecting with
indoor unit capaicty index 150
or more and 160 or less, match
to the size of the field pipe
using the attached pipe.
Connection between the
attached pipe and the field pipe
must be brazed.
In case of connecting with a
200 type indoor unit or capacity
index more than 160 and less
than 200, match to the size of
the field pipe using the
attached pipe. Connection
between the attached pipe and
the field pipe must be brazed.
1-2 ELECTRICAL SPECIFICATIONS
BSVQ100PV18 BSVQ160PV18 BSVQ250PV18
Power Supply Phase 1~
Frequency Hz 50 50 50
Voltage V 220-240
Voltage range Minimum V -10%
Maximum V +10%
Total circuit Minimum circuit amps (MCA) A 0.1 0.1 0.1
Maximum Fuse Amps A 15 15 15
Notes Voltage range : units are suitable for use on electrical systems where voltage supplied to unit
terminal is not below or above listed range limits
Maximum allowable voltage range variation between phases is 2%
MCA / MFA : MCA = 1.25 x FLA
MFA is smaller than or equal to 4 x FLA
Next lower standard fuse rating minimum 15A
Select wire size based on MCA
Instead of a fuse, use a circuit breaker