Maintenance (for a Qualified Service Person Only)
Si71-502
88
Operation Manual
4.3
How to Clean the Heat Exchange Element
CLEANING FREQUENCY
AT LEAST ONCE EVERY TWO YEARS
(FOR GENERAL OFFICE USE)
(CLEAN THE ELEMENT MORE FREQUENTLY IF NECESSARY.)
Warning
• Please exchange the heat exchange element if you find that the knob of the heat exchange
element is damaged or is deteriorated when cleaning it.
There is falling danger.
1. Detach the maintenance cover.
Refer to the section (4-1, 1).
2. Detach the air filter.
Refer to the section (4-1, 2).
3. Take out the heat exchange elements.
Pull out the air filter and then pull out the two heat exchanger elements.
4. Use a vacuum cleaner to remove dust and foreign objects on the surface of the heat exchange
element.
• Use the vacuum cleaner equipped with a brush on the tip of the suction nozzle.
• Lightly contact the brush on the surface of the heat exchange element when cleaning.
(Do not crush the heat exchange element while cleaning.)
fig 7
MODELS VAM150GJVE-1000GJVE
MODELS VAM1500GJVE
VAM2000GJVE
Summary of Contents for VAM 150GJVE
