Press NEXT
to advance
NEXT
PROGRAM
RUN OFF SET
Evening
Morning
MTuWThF
SaSu
Day
Night
HEAT
AUX
COOL
PM
AM
FILTER
SET
Evening
Morning
MTuWThF
SaSu
Day
Night
HEAT
AUX
COOL
PM
AM
FILTER
SET
20
Factory Defaults
If, for any reason, you desire to return all the stored settings back
to the factory default settings, follow the instructions below.
Enter advanced setup by sliding the Program Switch to SET. When the
clock is flashing, press the NEXT button for 5 seconds. Do not release the
button until this screen appears.
When the Cycles Per Hour is
flashing, press and hold the NEXT
button until this screen appears.
Press and hold the NEXT
button again until this
screen appears.
After restoring factory
defaults, the thermostat
screen will display all icons.
Slide the Program Switch to OFF or RUN to return
to normal operation.
WARNING: This will reset all Time Period and Advanced Programming to
the default settings. Any information entered prior to this reset will be
permanently lost.
