Procedure to Remove Outside Panels and Related Parts
Si281314E
2
Removal Procedure
1. Procedure to Remove Outside Panels and Related
Parts
Procedure
Warning Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1
Remove the front panel
2 (the front panel of the
side panel), after
removing the 1 screw
and pushing the front
panel downward.
2
Remove the top panel,
after removing the 8
screws.
3
Remove the front panel
1, after removing the 7
screws.
4
Remove the right side
panel, after removing
the 5 screws.
5
Remove the front panel
of the piping cover,
after removing the 1
screw.
6
Remove the side panel
of the piping cover,
after removing the 4
screws.
7
Hold the lower part (2
positions) and pull
frontward. Remove
from the top hooks
using a flathead
screwdriver etc. and
then pull downward the
whole suction grille to
remove it.
Front panel 2
Front panel 1
Suction grille
Top panel
Hooks
Right
panel
Side panel of
piping cover
Front panel of
piping cover