Removal of PCBs / Electrical Box
Si00-976
10
Removal Procedure
3. Removal of PCBs / Electrical Box
Procedure
Warning
Be sure to wait for 10 minutes or more after turning off all power
supplies before disassembling work.
Step
Procedure
Points
1. Remove the right side
panel.
Preparation
Remove the top panel and
the front panel according to
the “Removal of Outer
Panels”.
Colors of the connection
wires are as follows.
(1) black
(2) white
(3) red
(
) yellow / green
1
2
Remove the 4 screws
and disconnect the
connection wire and the
power supply wire.
Remove the 2 screws
and detach the earth /
ground wires.
3
Remove the 3 screws
of the right side panel.
4
Remove the screw of
the electrical box.
(R18591)
Terminal board
Connection
wire
Power supply
wire
Earth /
ground wire
(R16506)
Right side
panel
(R16507)