[
]
RoCon G1 - EHS157056
KA RoCon G1 - EHS157056 . 07/2019 . 008.1550899 00 - EN
3/24
[
]
RoCon G1 - EHS157056
Power supply connection
The power supply of the RoCon G1 Gateway takes place through the wall plug transformer. To avoid damage to the device
please only use the originally supplied power supply unit.
The initial start-up of the Gateway may take a few minutes. About 30 seconds after connecting the RoCon G1 to the power
supply the
on the side of the casing lights up in green.
LED
Further steps
To use the Gateway, you require a
Cloud Service Account which is free of charge. Please register on
Daikin
http://www.daikin-control.com. On this website you can then connect the Gateway with the account and use it online or with a
smartphone app.
Status
colours
LED
We recommend a broadband internet connection with a flat data rate because the amount of
data may be up to 2
per month.
GB
F
DHCP
or the commissioning of the RoCon G1 Gateway,
must be activated on the Router.
Picture 3: Connection scheme RoCon G1
EHS157034
EHS157068
7
5
6
2
1
4
3
1
Gateway
2
RoCon control
3
Connection cable RoCon control
4
Network cable
5
Network socket
6
Contactor contact socket
7
Power supply unit
Altherma
integrated
solar unit
CANH CANL
Vcc
J13
1
Colour
Meaning
Possible fault rectification / Description
Permanently green
Device ok, all connections
established.
-
Blinking blue
No connection to RoCon
control established.
Please check the connection between
control and Gateway.
Blinking yellow
No internet connection
possible.
Please check whether the power cable is
correctly connected to the router that supports
the DHCP.
Red blinking
No connection possible to
.
the server
The Daikim Cloud Server is currently not
available. Please contact the
customer
Daikin
service if this condition persists for more than one
hour.
Purple blinking
Update mode
Software is being updated.
