Daikin MC401VE, Service Manual

Page: 17 / 53

Operating Manual SiE74-202
10 Operation Manual
1.8 Setup
How to Fit the Ion Filter Roll.
CAUTION
Always fit the prefilter and ion filter roll before use.
Use without filters can damage the equipment.
1. Remove the front panel.
Hold the front panel by the sides, pull up and out.
2. Remove the ion filter (roll) case.
Hold the ion filter (roll) case by the left and right side handles, and
lift upward and out.
3. Fit the filter roll.
Face the ion filter (roll) case downwards as shown below and fit
the filter roll in the cutouts for the filter spool.
Fit the holes on leading edge over the pegs on both sides of the
case.
1
2
4
P HO
TO CTAIYTI C AIR CLEANER MC4 01 VE
1 2
4
PHOT
OCTA IYTIC AIR C LEAN ER
MC40
1VE
Front panel
Front panel
or
1
2
4
PHOTO CTAIY TIC
AIR C LEANE R
MC40
1VE 1
2
4
PHOTO CTAIY
TIC AIR CLE ANER
MC40 1VE
Handles
Ion filter (roll) case
Dark side
Holes
Filter roll
Cutouts for
filter spool
Insert ends
into cutouts.
Ion filter
(roll) case
Pegs
Pegs
Q
R