![background image](http://html2.mh-extra.com/html/daikin/maverick-i-mpsa07d/maverick-i-mpsa07d_installation-and-maintenance-manual_5693281070.webp)
IM 971-3 • MAVERICK I 70 www.DaikinApplied.com
Accessories
DDC Economizer for Horizontal Duct Installation
Field Installed Only
RXRD-01DAHM3—Single Enthalpy (Outdoor)
RXRX-AR02—Wall-mounted CO
2
Sensor
• Features Honeywell controls
•
Available as a field installed accessory only
• Gear driven direct drive actuator
• Fully modulating (0–100%)
• Ultra low leak dampers meet California Title 24
requirements
• Slip-in design for easy installation
• Standard barometric relief damper
• Single enthalpy
• CO
2
input sensor available
• Field assembled hood ships with economizer
• Economizer ships complete for horizontal duct application
• Field installed power exhaust available
• If connected to a Building Automation System (BAS), all
economizer functions can be viewed on the (BAS), or
16 × 2 LCD screen
• If connected to thermostat, all economizer functions can
be viewed on 16 × 2 LCD screen
Figure 49:
Electromechanical Controls Horizontal Economizer, MPS 007D – 012D
[ ] Designates Metric Conversions
CUT OUT
12
5
/
8
36
3
/
8
[320.7 mm 924 mm]
OPENING DUCT
37
3
/
4
[958.8 mm]
12
3
/
8
[314.3 mm]
MANUAL FRESH
AIR DAMPER
SUPPLY DUCT
RETURN DUCT
4 [101.6 mm]
MINIMUM
RECOMMENDED
42
57
/
64
[1089 mm]
16
9
/
16
[421 mm]
28
23
/
64
[720 mm]
5
33
/
64
[140 mm]
ACTUATOR
ENTHALPY SENSOR
Summary of Contents for Maverick I MPSA07D
Page 93: ......