background image

Operation manual

13

LRYEQ LCBKQ3AV1(E)

CONVENI-PACK

4P448940-1A – 2016.07

• Is there not much dust on the heat exchanger 

of the outdoor unit?
Remove the dust with a brush or vacuum 
cleaner without using water or consult your 
dealer.

• Is cold air not leaking outside?

Stop the leakage of cold air.

• Is the set temperature in the indoor unit (unit 

cooler and showcase) not too high?
Set the temperature appropriately.

• Are high-temperature articles not stored?

Store them after they are once cooled off.

• Is the opening time of the door not long?

Minimize the opening time of the door.

8-3 Consult your dealer in the following 

cases.

WARNING

When the CONVENI-PACK is malfunctioning 
(giving off a burning odour, etc.) turn off 
power to the unit and contact your local 
dealer.
Continued operation under such circumstances 
may result in a failure, electric shocks or fire haz-
ards.

1. Safety devices, such as the fuse, breaker, 

and earth leakage breaker, frequently oper-
ate or the operation of the RUN switch is not 
stable.
Contact your dealer after turning the power off.

2. Turn off the power and consult your dealer if 

symptoms other than the above are noticed 
or the equipment does not go into normal 
operation after taking the steps specified in 
8-2.

9. INSPECTION

The preventive maintenance of the unit is 
required in order not to damage commercial 
products. Request a contractor authorized by 
our dealer for inspection.
Refer to information on maintenance inspection on 
page 15 for maintenance inspection.

4PEN448940-1A.book  Page 13  Thursday, August 25, 2016  11:23 AM

Summary of Contents for LRYEQ16A7Y1





















Reviews: