manualshive.com logo in svg

Daikin Inverter FLKS25BVMB, Operation Manual

Share
Download
Daikin Inverter FLKS25BVMB Operation Manual Download Page 16

15

OUTDOOR UNIT QUIET Operation

OUTDOOR UNIT QUIET operation lowers the noise 
level of the outdoor unit by changing the frequency and 
fan speed on the outdoor unit.  This function is conve-
nient during night.

■

To start OUTDOOR UNIT 
QUIET operation

1. Press “QUIET button”.

• “

” is displayed  on the LCD.

■

To cancel OUTDOOR UNIT 
QUIET operation

2. Press “QUIET button” again.

• “

” disappears from the LCD.

NOTE

■

Note on OUTDOOR UNIT QUIET operation

• If using a multi system, this function will work only when the OUTDOOR UNIT QUIET 

operation is set on all operated indoor units.
However, if using priority-room setting, see “Note for multi system” (page 20.)

• This function is available in COOL, HEAT, and AUTO modes.

(This is not available in FAN and DRY mode.)

• POWERFUL operation and OUTDOOR UNIT QUIET operation cannot be used at the 

same time. 
Priority is given to the function of whichever button is pressed last.

• If operation is stopped using the remote controller or the main unit ON/OFF switch when 

using OUTDOOR UNIT QUIET operation, “

” will remain on the remote controller 

display.

C

TEMP

ON/OFF

POWERFUL

HOME LEAVE

MODE

FAN

SWING

O N

QUIET

1, 2

01_EN_3P194444-5D.fm  Page 15  Wednesday, August 21, 2013  7:00 PM

Summary of Contents for Inverter FLKS25BVMB

































Reviews:

No comments

Brands by name

Popular brands

Load more brands