3
English
3. Clean the air filter.
Use vacuum cleaner
A)
or wash the air filter with water
B)
.
A)
Using a vacuum cleaner
B)
Washing with water
When the air filter is very dirty,
use soft brush and neutral
detergent
Remove water and dry in the shade.
NOTES
•
Do not wash the air conditioner with hot water of more than
50°C. Doing so may result in discoloration or deformation.
•
Never dry the filter by direct firing. Doing so may result in
burning.
4. Fix the air filter.
Refer to item No. 2.
5. Shut the suction grille.
Slowly push up the suction grille, and then securely hook
it onto the decoration panel while pushing the two knobs.
PRECAUTION
•
When closing the suction grille, the lace might be
pinched.
Make sure the lace has not come out of the suction
grille before closing it.
6. After turning on the power, press FILTER SIGN
RESET button.
The “TIME TO CLEAN AIR FILTER” display vanishes.
HOW TO CLEAN AIR OUTLET AND OUTSIDE PANELS
•
Clean with soft cloth
•
When it is difficult to remove stains, use water or neutral
detergent.
•
When the flap is extremely contaminated, remove it as
below and clean or exchange it.
(Flap for exchange is optional.)
NOTES
•
Do not use gasoline, benzene, thinner, polishing powder,
liquid insecticide. It may cause discoloring or warping.
•
Do not let the indoor unit get wet. It may cause an electric
shock or a fire.
•
Do not scrub firmly when washing the blade with water.
The surface sealing may peel off.
•
Do not use water or air of 50
°
C or higher for cleaning air fil-
ters and outside panels.
HOW TO CLEAN THE SUCTION GRILLE
1. Open the suction grille.
Push it downward slowly while pressing the buttons pro-
vided on two spots. (Follow the same procedure for clos-
ing.)
2. Remove the lace of the suction grille.
Remove the laces hooked on the two metal fittings of the
panel body.
3. Detach the suction grille.
Open the suction grille 45 degrees and lift it upward.
4. Detach the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 2)
5. Clean the suction grille.
Wash with a soft bristle brush and
neutral detergent or water, and dry
throughly.
• When very grimy
Directly apply the type of detergent
used for claning ventilation fans or ovens, wait 10 min-
utes, and then rinse with water.
NOTE
•
Do not wash the air conditioner with hot water of more than
50°C. Doing so may result in discoloration or deformation.
6. Reattach the air filter.
Refer to “HOW TO CLEAN THE AIR FILTER”.
(Refer to Fig. 2)
7. Reattach the suction grille.
Refer to item No. 2.
8. Fit the lace of the suction grille.
Fit in the reverse order of the procedure 2.
9. Close the suction grille.
Refer to item No. 1.
Yes
No
Suction grille
Lace
Does not
protrude to
the side
Fig. 3
Metal fittings
Lace
Tab
Connection
Fig. 4
01_EN_3P177429-7P.fm Page 3 Monday, August 9, 2010 4:47 PM
