12 Unit installation
Installation and operation manual
14
FXAA15~63AUV1B
VRV system air conditioner
3P622285-1B – 2020.10
12.2
Opening and closing the unit
12.2.1
To remove the front panel
1
Open the front panel. Hold the front panel by the panel tabs on
both sides and open until the panel stops.
a
a
Panel tabs
2
Remove the front panel by pushing hooks on either side of the
front panel towards the side of the unit and remove the panel.
Or remove it by sliding the front panel either to the left or right
and pulling it forward.
a
a
a
a
Panel hook
12.2.2
To re-install the front panel
1
To attach the front panel, align the hooks of the front panel with
the slots and push them all the way in.
2
Close the front panel slowly.
12.2.3
To remove the front grille
CAUTION
Wear adequate personal protective equipment (protective
gloves, safety glasses,…) when installing, maintaining or
servicing the system.
1
Remove the front panel(
14]).
2
Remove the screws.
▪ 2 for FXAA15~32
2×
▪ 3 for FXAA40~63
3×
3
Push down the 3 upper hooks marked with a symbol with 3
circles in the direction of the arrows. Remove cardboard
between the filter and the heat exchanger.
a
b
a
Hook
b
Cardboard
4
Making sure not to catch the horizontal flaps, remove the front
grille by pulling in the direction of the arrow.
12.2.4
To re-install the front grille
1
Install the front grille and firmly engage the 3 upper hooks.
2
Install the screws back (2 for FXAA15~32 and 3 for
FXAA40~63).
3
Re-install front panel (
"12.2.2 To re-install the front
14]).
12.2.5
To open the service cover
1
Remove 1 screw from the service cover.
2
Pull out the service cover horizontally away from the unit.
b
a
c
a
Service cover screw
b
Service cover
c
Handle
12.2.6
To close the service cover
1
Place the service cover to its original place on the unit.
2
Install 1 screw back on the service cover.
12.3
Mounting the indoor unit
12.3.1
To install the mounting plate
1
Remove the mounting plate from the unit.
▪ Remove one screw from FXAA15~32 or 2 screws from
FXAA40~63.
▪ Push the knobs in the direction of the arrow.
▪ Remove the mounting plate.