background image

16

ECONO Operation

ECONO operation is a function which enables ef

fi

 cient operation by limiting the 

maximum power consumption value.

This function is useful for cases in which attention should be paid to ensure a 

circuit breaker will not trip when the product runs alongside other appliances.

To start ECONO operation

 

Press 

 during operation

.

• 

” is displayed on the LCD.

To cancel ECONO operation

 

Press 

 again.

• 

” disappears from the LCD.

Running current and 
power consumption

From start up until set 
temperature is reached

Time

Maximum during 
normal operation

Maximum during 
ECONO operation

Normal 
operation

ECONO 
operation

This diagram is a representation for illustrative purposes only.

• 

The maximum running current and power consumption of the air conditioner in ECONO 

operation vary with the connecting outdoor unit.

NOTE

Notes on ECONO operation

 

ECONO Operation can only be set when the unit is running. Pressing the operation stop button causes the settings to be canceled, and the 

• 

 disappears from the LCD.

ECONO operation is a function which enables ef

fi

 cient operation by limiting the power consumption of the outdoor unit (operating frequency).

• 

ECONO operation functions in AUTO, COOL, DRY and HEAT operations. 

• 

POWERFUL and ECONO operation cannot be used at the same time.

• 

Priority is given to the function of whichever button is pressed last. 

Power consumption may not drop even if ECONO operation is used of the level of power consumption is already low.

• 

01_EN_3P278434-2A.indd   16

01_EN_3P278434-2A.indd   16

7/22/2011   3:31:01 PM

7/22/2011   3:31:01 PM

Summary of Contents for FVXS60KVMA




































Reviews: