14
Basic Operation
English
Air outlet selection
• Make air outlet selection according to what suits you.
Page 6
When setting the air outlet selection switch to
• Air conditioner automatically decides the appropriate blowing pattern depending on the
operating mode/situation.
Mode
Situation
Blowing pattern
COOL
(
)
At start of operation or when
the room is not fully cooled.
Air blows from the upper and
lower air outlets in order to
reach the set temperature
quickly.
When the room has become
fully cool, or when 1 hour has
passed since turning on the
air conditioner.
Air blows only from the upper
air outlet so that air does not
come into direct contact with
people and indoor temperature
is equalized.
HEAT
(
)
At start or when the room is
not fully warmed.
Air blows from the upper and
lower air outlets in order to
reach the set temperature
quickly.
At times other than the above
situations.
Air blows only from the upper
air outlet so that air does not
come into direct contact with
people.
DRY
(
)
Whenever in DRY mode.
Air blows only from the upper
air outlet so that air does not
come into direct contact with
people.
FAN
(
)
Whenever in FAN mode.
AUTO
(
)
Operates in the actual operation mode of the air conditioner according to the
descriptions in this table. (COOL or HEAT)
When setting the air outlet selection switch to
• Regardless of the operating mode or situation, air blows from the upper air outlet.
• Use this switch when you do not want air coming out of the lower air outlet.
(While sleeping, etc.)
01_EN_3P379751-3.indd 14
11/10/2014 9:15:24 AM
Summary of Contents for FVXS09NVJU
Page 110: ...37 MEMO ...
Page 111: ...38 Español ...
