manualshive.com logo in svg

Daikin FTY25CMA, Operation Manual

Share
Download
Daikin FTY25CMA Operation Manual Download Page 14

13

POWERFUL Operation

POWERFUL operation quickly maximizes the effect 
in any of the operation modes. Using POWERFUL 
operation you will get always the maximum efficiency.

■

To start POWERFUL 
operation

1. Press “POWERFUL button”.

• POWERFUL operation ends in 20 minutes.  

Then the system automatically operates 
again with the settings which were used 
before POWERFUL operation.

• When using POWERFUL operation, 

there are some functions which are not 
available.

• “

” is displayed  on the LCD.

■

To cancel POWERFUL 
operation

2. Press “POWERFUL button” 

again.

NOTE

■

■

■

■

Notes on POWERFUL operation

•

In COOL and HEAT mode

To maximize the cooling (heating) effect, the capacity of outdoor unit must be increased 
and the air flow rate be fixed to the maximum setting.
The temperature and air flow settings are not variable.

•

In DRY mode

The temperature setting is lowered by 2.5°C and the air flow rate is slightly increased.

•

In FAN mode

The air flow rate is fixed to the maximum setting.

TEMP

ON/OFF

POWERFUL

HOME LEAVE

MODE

TIMER

FAN

SWING

SILENT

SENSOR

ON

CANCEL

OFF

O N

1, 2

01_EN_3P132108-6F.fm  Page 13  Tuesday, June 28, 2005  11:46 AM

Summary of Contents for FTY25CMA

























Reviews:

No comments

Brands by name

Popular brands

Load more brands