33
To change the default settings
No.
Menu
Setting
Description
5
CONTINUE
DRY
On *
CONTINUE DRY operation is performed.
Off
CONTINUE DRY operation is not performed.
< Note >
• When the indoor temperature or humidity falls far below the preset value, the fans of indoor and outdoor units are stopped to keep
the room comfortable.
This operation is activated in the COOLING, “SARARA” DRY, and DRY COOLING operations.
• When the CONTINUE DRY is set to “On”, starting the COOLING, “SARARA” DRY, or DRY COOLING operation triggers the
deodorising function which reduces any unpleasant odour coming from the indoor unit and the unit does not blow air for
40 seconds.
• Before the outdoor unit operates, the indoor temperature may be higher than the set temperature.
6
INSTALLED
POSITION
*
Oblong centre *
The horizontal airfl ow direction blows air evenly to the right and left.
Oblong right corner
The horizontal airfl ow direction blows air to the left.
Oblong left corner
The horizontal airfl ow direction blows air to the right.
Horizontal centre
The horizontal airfl ow direction blows air evenly to the right and left.
Horizontal right corner
The horizontal airfl ow direction blows air to the left.
Horizontal left corner
The horizontal airfl ow direction blows air to the right.
< Note >
• Airfl ow direction is properly controlled by inputting data on the room shape and installation position of the indoor unit in the remote
controller. Set oblong or horizontal according to the room shape.
• If you do not set the right corner and left corner correctly, the airfl ow direction may not be properly controlled in some airfl ow settings.
• The airfl ow direction range at the horizontal airfl ow setting (airfl ow direction that can be selected with
) will change according
to the settings for the installation position.
< Setting guides >
When the distance is 2 to
50cm, set to the left corner.
When the unit is installed in
the centre, set to centre.
When the distance is 2 to
50cm, set to the right corner.
7
RESET USED
POWER
Reset with
APPLY
Resets the total power consumption to 0kWh.
< Note >
• This function resets the total power consumption.
• To check the power consumption, press
.
8
SOUND
VOLUME
High
The volume is high.
Low *
Normal volume.
Off
The volume is off.
< Note >
• This function sets the volume of the receiving tone of the indoor unit.
* Default setting
01_EN_3P338603-1C.indd 33
9/28/2013 2:33:01 PM
