background image

21

TIMER Operation

To use OFF TIMER with a 24 hour clock display

(24 HOUR ON/OFF TIMER)

 To set the ON TIMER in an hours remaining display.

 Check that the clock is correct.

If not, set the clock to the present time. 

 Page 10

1. 

Press 

 .

“ 

 ” is displayed on the LCD.

“ 

 ” blinks.

 “   ” and day of the week disappear from the LCD.

2. 

Press   until the time setting reaches the point 
you like.

 Each pressing of either button increases or decreases the timem setting by 10 minutes. 

Holding down either button changes the time setting rapidly.

3. 

Press 

 again.

 “ 

 ” and setting time are displayed on the LCD.

 The TIMER lamp lights orange.

To cancel OFF TIMER operation

 Press 

 .

 “ 

 ” and setting time disappear from the LCD.

 “   ” and day of the week are displayed on the LCD.

 The TIMER lamp goes off.

To combine ON TIMER and OFF TIMER

 A sample setting for combining the 2 timers is shown below.

(Example)

Present time: 23:00 (The unit operating)
OFF TIMER at 0:00
ON TIMER at 14:00

Combined

NOTE

NIGHT SET mode

 When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL) to prevent excessive cooling 

during sleeping hours.

ON/OFF TIMER Operation

01_EN_

06/6/2015   --:--:-- AM

Display

 Page 10

Summary of Contents for FTXV20W2VMA

































































































































































Reviews: