13
Basic Operation
Useful Functions
Adjusting the Airfl ow Direction
You can adjust the airfl ow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the fl ap and louvres.
− If you attempt to move the fl ap and louvres forcibly by hand when they are swinging, the mechanism
may be damaged.
− Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airfl ow direction
Press
.
• “ ” appears on the LCD.
• The fl ap (horizontal blade) will begin to swing.
Right and left airfl ow direction
Press
.
• “
” appears on the LCD.
• The louvres (vertical blades) will begin to swing.
The 3-D airfl ow direction
Press
and
.
• “ ” and “
” appear on the LCD.
• The fl ap and louvres move in turn.
• To cancel 3-D airfl ow, press either
or
again.
The fl ap or louvres will stop moving.
To set the fl ap or louvres at the desired position
• This function is effective while the fl ap or louvres are in auto swing mode.
Press
and
when the fl ap or louvres
reach the desired position.
• In the 3-D airfl ow, the fl ap and louvres move in turn.
• “ ” or “
” disappears from the LCD.
NOTE
Notes on airfl ow direction setting
• The movable range of the fl ap varies according to the operation mode.
Note on 3-D airfl ow
• Using 3-D airfl ow circulates cold air, which tends to collect at the bottom of the room,
and hot air, which tends to collect near the ceiling, throughout the room, preventing areas of
cold and hot developing.
Movable range of the flap
COOL / DRY
FAN
HEAT
01_EN_3P552666-8C.indd 13
26-Apr-19 1:50:26 PM
Summary of Contents for FTXV20UVMA
