Daikin FTXTP25M5V1B, User Reference Manual

Page: 39 / 44

8 | Troubleshooting
User reference guide
39
35M5V1B
Daikin room air conditioners
4D520466-11E – 2021.03
Problem Measure
The Wireless LAN adapter is not visible
on the unit overview screen ("Home"
screen) after the Wireless LAN adapter
has been configured. ▪ Check that the power is on.
▪ Check that the RUN LED is lit.
▪ If the AP LED is lit, press the MODE
buttton for 2 seconds to switch to
RUN mode.
▪ If the RUN LED is blinking, try
connecting the WLAN adapter to the
wireless network again. Make sure
the Wireless LAN adapter is close
enough to the router (Wireless LAN
access point).
▪ If the RUN LED is lit, make sure that
the
smartphone or tablet is
connected to the same wireless LAN
network as the Wireless LAN adapter.
When trying to make a direct
connection to the adapter (AP mode),
the Wireless LAN adapter is not visible
in the available Wi-Fi networks list of
the phone/tablet. ▪ If the AP LED is not lit, press the
MODE button for 2 seconds to switch
to AP mode.
▪ If the AP LED is blinking, please wait
until the AP LED is lit (approximately
1 minute). The Wireless LAN adapter
is still starting up.
▪ If the AP LED is lit, switch to RUN
mode by pressing the MODE button
for 2 seconds. Now switch back to AP
mode by pressing the MODE button
again for 2 seconds. This procedure
will change the wireless channel on
which the Wireless LAN adapter is
operating. Repeat if necessary.