background image

English

16

 

COMFORT AIRFLOW operation

The 

fl

 ow of air will be in the upward direction while in COOL operation and in the downward direction 

while in HEAT operation, which will provide a comfortable wind that will not come in direct contact with 

people.

COOL operation

HEAT operation

 

INTELLIGENT EYE operation

“INTELLIGENT EYE” is the infrared sensor which detects the human movement.

If no one is in the room for more than 20 minutes, the operation automatically changes to energy saving 

operation.
The INTELLIGENT EYE sensor according to the following situations.

 

A person is detected in area 1.

Area 1

Area 2

 

A person is detected in area 2.

Area 1

Area 2

 

People are detected in both areas.

Area 1

Area 2

 

No people are detected in the areas.

Use the INTELLIGENT EYE operation in 
combination with the COMFORT AIRFLOW 
operation.

The unit will go into energy-saving mode after 
20 minutes.
* The wind direction may differ from the 

illustrated direction depending on the actions 
and movements of the people in the areas.

INTELLIGENT EYE operation is useful for energy saving

 

Energy saving operation

•  If no presence detected in the room for 20 minutes, the energy saving operation will start.
•  This operation changes the temperature –2°C in HEAT / +2°C in COOL / +2°C in DRY operation from set temperature. 

When the room temperature exceeds 30°C, the operation changes the tempe1°C in COOL / +1°C in DRY operation from set 
temperature.

•  This operation decreases the air

fl

 ow rate slightly in FAN operation only.

 

Combination COMFORT AIRFLOW and INTELLIGENT EYE operation

The unit can go into operation with the COMFORT AIRFLOW and INTELLIGENT EYE operations 

combined.

COMFORT AIRFLOW / 

INTELLIGENT EYE Operation

Summary of Contents for FTXTM30M2V1B













































Reviews: